Is that something that can be diagnosed in an hr?
Is that something that can be diagnosed in an hr?
Based upon the information you have provided, my gut says the expansion valve is stuck closed. My guess is the tech misdiagnosed high liquid pressure as an overcharge. If the compressor were non operable, you would have never been able to get a charge back in the system.
If the expansion valve were stuck closed, all off the refrigerant would end up in the condenser and not allowed to flow into the cabin evaporator. You would get heat in the liquid lines but the suction lines would not cool down.
Sent from my SM-G930P using Tapatalk
Phillip M.
09.5 SBM GT Sports/Premium/Roof
Engine: Stock Bottom End
Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
Cam: BTR IV PD
Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
Drivetrain: 6L80, Sonnax
Suspension: BMR 15" Strange Coilovers
Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
Ported LSA Blower, 9.55/2.55, 102 TB, Chiller
High Compression/Boost/E85
How hard is that to change? Thanks
It is located where the lines enter the firewall on the cabin side. I have never replaced one on a G8 so I'm no help as far as how difficult it is. Typically, you have to remove the charge, disconnect the lines at the firewall, and then remove the evaporator core from the dash. They are usually buried unfortunately. It MAY be about to come out the firewall...
txv1.png
txv2.png
Four Seasons offers a replacement for the G8... 39468
Phillip M.
09.5 SBM GT Sports/Premium/Roof
Engine: Stock Bottom End
Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
Cam: BTR IV PD
Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
Drivetrain: 6L80, Sonnax
Suspension: BMR 15" Strange Coilovers
Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
Ported LSA Blower, 9.55/2.55, 102 TB, Chiller
High Compression/Boost/E85
That's where I thought it was. Man if that comes out from under the dash, looks like a nightmare job..
Gonna drop it off at the dealership Monday or Tuesday...
Anyone ever change an expansion valve on a g8???
92192021 Was the original part, looks like the P/N Ray listed is the newest.
Alldata shows just 1.1hrs for R/R of that part. Looks like it is replaceable from the front...
G8 TX HVAC RR.pdf
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Since it can come off from the front, I'd be inclined to tackle it, if you have a shop that will drain/refill the system for you...
Then again, if that's the problem - a $100 part and an hour of labor ain't too shabby to get your AC back!
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
What were the pressure readings on both sides ? The biggest blockage point on these is the dryer built in to the passenger side of the condensor.It removes from the top of condensor
2009.5 G8 GT Maverick Silver;Sport/Prem,Sunroof, Nav kit,
Vararam,Holden badge kit, Kooks 1 7/8, VMS Tuned
2009 White Hot/Red G8 GT;Sport/Prem,Sunroof, Nav kit,,Holden badges,Kooks 1 7/8, Maggie TVS 1900,VMS Tuned. Injection is great but i love being blown!
2001 Trans Am WS6 NBM/Camel, 6spd. 21K Miles
2001 G/P GT= beater
Can't remember off hand.. is that a diy fix? Thanks guys!