Site Sponsors & Vendors
Page 12 of 14 FirstFirst ... 21011121314 LastLast
Results 111 to 120 of 134

Thread: Manufacturing DA - A New Chiller

  1. 08-23-2018, 12:12 PM #111
    STL_G8GT
    STL_G8GT is offline
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    5,001
    Post Thanks / Like

    Default

    Quote Originally Posted by Phil@PnP Tech View Post
    BMW: 17-12-2-284-291

    This is a Pierburg CWA-50 pump. Pierburg is also the manufacture of the C6 ZR1 intercooler pump and this one is right on par with it on flow.

    You will need a pigtail (Ford: CU2Z-14S411-AYA) and wire it as so...
    Attachment 28371

    Pin 1 goes to ground, 2 is unused, 3 needs to go to a +12v "ON" signal, 4 goes to the Positive Battery (10A fused). (You can also run 3 and 4 together on a fused ignition power.)
    Super interesting. Thanks Phil.
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader
    Reply With Quote Reply With Quote
  2. 08-23-2018, 12:33 PM #112
    hflores3
    hflores3 is offline
    Beyond Help
    Join Date
    Jul 2009
    Location
    Friendswood, TX
    Posts
    1,493
    Post Thanks / Like

    Default

    This thread is great!
    2009 G8 GT
    628.5 RWHP on gasoline​ ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
    Reply With Quote Reply With Quote
  3. 08-26-2018, 07:58 AM #113
    mooredata
    mooredata is offline
    Addicted Member mooredata's Avatar
    Join Date
    Oct 2009
    Location
    Illinois
    Posts
    540
    Post Thanks / Like

    Default

    added coolant yesterday.
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  4. 08-26-2018, 08:01 AM #114
    mooredata
    mooredata is offline
    Addicted Member mooredata's Avatar
    Join Date
    Oct 2009
    Location
    Illinois
    Posts
    540
    Post Thanks / Like

    Default

    pump
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  5. 10-14-2018, 02:27 PM #115
    Darkmanx
    Darkmanx is offline
    Beyond Help Darkmanx's Avatar
    Join Date
    May 2010
    Location
    ft lauderdale fl
    Posts
    2,148
    Post Thanks / Like

    Default

    whoever has this kit whos it working? whats the before and after iat at track

    Texas speed 408 stroker,Lingenfelter ls3 ported heads,tv1900,2.8 pulley,kooks header header back,custom axel back, squash double pump upgrade, e85 tein lowering , demon 8 triple pod, brembo brakes ,brm sway bar, bmr toe rod , bmr end link, spohn trailing arms, tein springs,tsw nurburgring rims. Icebox. Old numbers on stock engine 650/620 with 3.0 pulley
    Reply With Quote Reply With Quote
  6. 10-15-2018, 03:05 AM #116
    Phil@PnP Tech
    Phil@PnP Tech is offline
    Vendors Phil@PnP Tech's Avatar
    Join Date
    Nov 2011
    Location
    Cincinnati,OH
    Posts
    544
    Post Thanks / Like

    Default

    Here are a few examples I have on-hand...

    SBE 6.0 LSA 9.55/2.55. ~70F ambient. 10.19@137. 45º IAT rise with brick is collapsing.
    iat1.jpg

    6.0 1.9L Maggie 9.75@139... 32º IAT rise
    iat2.jpg

    Both G8s
    Phillip M.
    09.5 SBM GT Sports/Premium/Roof

    Engine: Stock Bottom End
    Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
    Cam: BTR IV PD
    Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
    Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
    Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
    Drivetrain: 6L80, Sonnax
    Suspension: BMR 15" Strange Coilovers
    Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
    Ported LSA Blower, 9.55/2.55, 102 TB, Chiller

    High Compression/Boost/E85
    Reply With Quote Reply With Quote
  7. 10-16-2018, 05:25 AM #117
    Darkmanx
    Darkmanx is offline
    Beyond Help Darkmanx's Avatar
    Join Date
    May 2010
    Location
    ft lauderdale fl
    Posts
    2,148
    Post Thanks / Like

    Default

    What was the ambient temps on those runs

    Texas speed 408 stroker,Lingenfelter ls3 ported heads,tv1900,2.8 pulley,kooks header header back,custom axel back, squash double pump upgrade, e85 tein lowering , demon 8 triple pod, brembo brakes ,brm sway bar, bmr toe rod , bmr end link, spohn trailing arms, tein springs,tsw nurburgring rims. Icebox. Old numbers on stock engine 650/620 with 3.0 pulley
    Reply With Quote Reply With Quote
  8. 10-16-2018, 06:10 PM #118
    The Yeti
    The Yeti is offline
    VIP Member The Yeti's Avatar
    Join Date
    Sep 2009
    Location
    East Bay Cali
    Posts
    495
    Post Thanks / Like

    Default

    Hey Phil, Still taking forum discounts? I'm interested in your setup for sure.
    Pat G Tune & DOD cam, Rick C TB, LSA, Ported Heads, Circle D 2600 Stall
    OBX Exhaust, SLP UDP,H&R springs, Koni Shocks
    BP catch can, BMR Bushings/suspension/chassis
    V Brembo's, Slotted/Drilled Rotors, 3.27s Gears

    Bolt ons Street tires
    12.649@107.817 60ft 1.96 Da 700ft

    Heads/Cam pre stall Street tires
    12.16@114.21 60ft 1.75 Da -200

    After Stall
    11.82@115.9 60ft 1.66 DA 400ft

    Zex 125shot
    11.48@124 60ft 1.83 DA 2000ft
    Reply With Quote Reply With Quote
  9. 10-17-2018, 05:18 AM #119
    Darkmanx
    Darkmanx is offline
    Beyond Help Darkmanx's Avatar
    Join Date
    May 2010
    Location
    ft lauderdale fl
    Posts
    2,148
    Post Thanks / Like

    Default

    Quote Originally Posted by The Yeti View Post
    Hey Phil, Still taking forum discounts? I'm interested in your setup for sure.
    Interested

    Texas speed 408 stroker,Lingenfelter ls3 ported heads,tv1900,2.8 pulley,kooks header header back,custom axel back, squash double pump upgrade, e85 tein lowering , demon 8 triple pod, brembo brakes ,brm sway bar, bmr toe rod , bmr end link, spohn trailing arms, tein springs,tsw nurburgring rims. Icebox. Old numbers on stock engine 650/620 with 3.0 pulley
    Reply With Quote Reply With Quote
  10. 10-17-2018, 12:23 PM #120
    Phil@PnP Tech
    Phil@PnP Tech is offline
    Vendors Phil@PnP Tech's Avatar
    Join Date
    Nov 2011
    Location
    Cincinnati,OH
    Posts
    544
    Post Thanks / Like

    Default

    Quote Originally Posted by Darkmanx View Post
    What was the ambient temps on those runs
    63ºF and 1029 DA

    46ºF and -951 DA

    Quote Originally Posted by The Yeti View Post
    Hey Phil, Still taking forum discounts? I'm interested in your setup for sure.
    Yeah, we can work something out.
    Phillip M.
    09.5 SBM GT Sports/Premium/Roof

    Engine: Stock Bottom End
    Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
    Cam: BTR IV PD
    Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
    Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
    Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
    Drivetrain: 6L80, Sonnax
    Suspension: BMR 15" Strange Coilovers
    Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
    Ported LSA Blower, 9.55/2.55, 102 TB, Chiller

    High Compression/Boost/E85
    Reply With Quote Reply With Quote
« Need help with LSA swap ALMOST THERE!!! | Vector single turbo re-imagined. »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules