Launching with my 4000 converter
Would it be better to bring the RPMs up as high as I can or keep the RPMs around idle - 1500 to allow it to flash more? I wasnt sure if there was some research that showed what would be better or if I just have to test it all out. I tried from 1200-2000 last night with DA of 2500 and 70% humidity, shitty day to race, and I got 1.56-1.57. Do you think I would have better results bringing up the rpms more if the tires could hold?
Thanks
Jon
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
Also since you send your tune out to a third party and you have a triple disc converter still make sure it is not locked in 1st and 2nd. If locked I can see that slowing down your 60 foot times. But just off idle has worked best for me to get high 1.4s. It was just probably a bad day. DA in my experience has played a huge role in 60 foot times. When I use the Tucson track with DAS from 4-7K my 60 foot times are in the mid 1.5s. When I go to Chandler and use WHP dragstrip with DAS from 1-4K I can get a high 1.4. If I were at sea level who knows. Good luck!Originally Posted by JonnyG2132
2009 g8gt - rotofab cai, ported throttle body & FAST intake, 1 7/8s kooks shorties with 3 inch exhaust. 3600 circle D triple disc stall and tranni cooler, udp, hoosier 17 inch drag radials. 223/235 cam/gmpp Heads. HP Tuners. 416 with 11.3 to 1 compression.
best time: 11.47 @ 118.7 3000 feet da
best top end 119.4 4000 feet da
Ya I live near New Era, so I just drive it to them or we go to the track together. It doesnt lock until 3rd gear. DA def effected it last night. I wasnt looking for personal bests or anything. Just testing out different things. The lowest RPM i tried was 1500, so next time I can try idle, which is 1000 or so, and 1200
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
cool. where is Webster? When I was 12 my father moved us to L.A. The last place I lived was Huntington.
2009 g8gt - rotofab cai, ported throttle body & FAST intake, 1 7/8s kooks shorties with 3 inch exhaust. 3600 circle D triple disc stall and tranni cooler, udp, hoosier 17 inch drag radials. 223/235 cam/gmpp Heads. HP Tuners. 416 with 11.3 to 1 compression.
best time: 11.47 @ 118.7 3000 feet da
best top end 119.4 4000 feet da
Rochester Ny
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
I launched Brett's G8 with the 4000 and 3.27's at 2300-2500rpm and cut a 1.48 60ft. See what works with your tune....If I launched lower it would spin so he is working on suspension upgrades.
https://www.facebook.com/RickCrawfordRacing
2009 G8 GT-Rick Crawford- LS-4-SPEED@nc.rr.com
2.00 60ft 13.06 @ 106.65 w/ 1.85 SLP Rocker-HPTuner
1.97 60ft 12.97 @ 107.9 w/ 3.45 gears
1.97 60ft 12.87 @ 107.7 w/ 4"-2.5" exhaust
1.94 60ft 12.57 @ 111.9 w/ 217/225 Lunati cam
2.03 60ft 12.37 @ 115.3 w/ Doug Thorley headers
1.94 60ft 12.20 @ 115.0 w/ 219/233 Thumpr Cam
1.70 60ft 11.38 @ 121.5 w/ 100hp NOS Dry shot-HSW controller & 285/40 NT05 Drag Radials on stock 18's
1.72 60ft 11.65 @118.55 w/ 221/233 111LSA+0 Ported AirRam intake, Street tires. All Motor. DoD/AFM still functional.
1.66 60ft 10.87 @ 127.08 w/ 221/233 lunati, 2800 stall, 100HP wet nitrous shot, milled & ported LS3's.
1.65 60ft 10.81 @ 129.10 150Hp shot 2600 stall.
1.53 60ft 10.59 @ 129.72 ALL MOTOR! ! ! ! Fastest N/A G8 Record Holder
Ok ya he mentioned that to me. Im going to the track tonight. DA should be around 1000. Launching from 1500-2000, I wouldnt spin. I will give it a try and see what happens. Ya I have stock suspension as well. I may need some upgrades
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
Differential snapped at the line. All done for the year
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
Thumbs down. Get it next time!
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Ya sucks big time. Track was like glue. It would have been a sick pass. Like you said, next time.
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
Posting Permissions
Reply With Quote