Need Help

[jus1975]

Any of you guys lowered with bmr parts. Such as there lca, trailing arms and toe Rods. I was lowered and aligned. Then I switched out the lca tailing arms and toe Rods. I've been to multiple alignment shops and they can't get aligned. Last time they needed a camber kit. Got it and it didn't Help on the rear. They said the eccentric will not move. I tried and it will only move quarter or so either direction. My guess is the lca are designed for the camaro and wasn't tested on these. Any ideas

[-Ray-]

Does BMR say their caster is adjustable? As far as I know, it's fixed. To add caster to my Pedders lowered G8 caster bits were added to add positive caster. What is the alignment shop saying the caster is?

[jus1975]

Does BMR say their caster is adjustable? As far as I know, it's fixed. To add caster to my Pedders lowered G8 caster bits were added to add positive caster. What is the alignment shop saying the caster is?

Camber is my issue

[GT Drew]

An aftermarket, lower control arm cam bolt is needed. They offer more adjustment than the stock bolts. If you stock bolts are seized , that is your problem. Have them put anti-seize on the bolt so it doesn't sieze to the bushing again.
s-l1600.jpg